A NOTE ON MODEL COMPATIBILITY

The following applies to non-light bearing models only: 

1911

     Our model is modeled from a Springfield Armory Operator and TRP. The 1911 Railed versions fit most 1911 with the known exceptions of the Colt "Rail Gun",  Taurus railed models, and Platypus.  They also fit most non-railed versions with the exception of tri-top versions and the Platypus models or other double stack models. Most shorter length 1911 versions fit in the longer length holsters.

2011

      Our model is modeled after the Staccato series. They fit most 2011 models that have the standard polymer 2011 grip module and do not have a tri-top or a full width dust cover. Does not fit Prodigy models or Platypus. Most shorter length 2011 versions fit in the longer length holsters. 

AREX

       Delta Gen2 models fit the same except the length of slide/barrel. 

BERETTA 

       M9 model fits most Beretta 92/96/M9 series that have the FLAT/vertical front of the trigger guard. 

      PX4 and PX4 Compact fit the same except for slide/barrel length.

CANIKS 

    It seems like the Rival fits most models other than the longer versions like the SFX and much shorter versions like the Elite Sub Compact which has a different trigger guard than ALL the other Canik models. 

CHIAPPA

      Rhinos fit the same except of the barrel length. There are some models with a BOMAR style vented rib sight system that will not fit. 

CZ

       SP01 and P01 fit the same except for length of slide/barrel.

        P09 and P07 fit the same except for length of slide/barrel.

        P10F, P10C, and P10S fit the same except for length of slide/barrel.

FN 

       509 Series fit the same except for length of slide/barrel.

GLOCK 

       If they're 9mm, any generation works across the board and fit is the same except for slide length until you get down to the G26 and G27 models where the frame is slightly different and the trigger guards are just a little different enough that you may run into issues with fit. Not everyone does, but some do. If they're 40SW up to Gen4 they fit the 9mm versions. At Gen5 40SW models change drastically. Up to that point, they're compatible other than length of slide. No Gen5 40SW is compatible with any 9mm model and they are NOT compatible with each other due to slide height and width differences between the models. 

     G48/48MOS both fit our mold and the G43 series fits the same other than slide length. 

    G43/G43X/G43XMOS all fit our G43 mold. 

 H&K 

       P30 Series fit the same except for length of slide/barrel.

        VP9 Series fit the same except for length of slide/barrel.

KIMBER

        K6 Series fit the same except for length of slide/barrel.

NOMAD 

         Fit the same except for length of slide/barrel.

ORACLE

         2311 fit the same except for length of slide/barrel.

POLYMER80

          Models follow the same rules as the Glock compatibility.

RUGER

        LC9/LC380 fit the same.

        LCPMax holsters will fit the LCP2 but not vise versa.

        Secuity 9 Series fit the same except for length of slide/barrel.

         SP101 fit the same except for length of slide/barrel.

          SR9 Series fit the same except for length of slide/barrel.

SAR 

          SAR9 Sport and SAR9 fit the same except for length of slide/barrel.

SHADOW SYSTEMS 

       DR/MR/XR Series follow the same rules as Glocks

        CR920 is NOT the same as the Glock 43 variants and takes a different mag.

SIG SAUER  

        1911s - some are different than normal 1911 and some are not. This model ONLY fits the specifically different SIG slide - look at pictures of them and you will see the difference in the shape of the slide.

         P226s and P220s fit the same. But some variations are very common from year to year in the Sig classic P series lineup. 

        P229s do not fit holsters made for the P226. Different Slides. Our P229 fits the most current as of 2024 slide like the Legion series and not previous versions 

        P320 Series fit the same except for length of slide/barrel. FYI the X5 does not have safeties and some shorter models do - be advised. 

        P365XL, P365X, and P365 fit the same except for length of slide/barrel.

        Macro Legion holsters fit the Macro Comp, Macro, and Macro TacOps, but not vice versa.

        P365 380acp and P365 9mm are NOT the same size.

        The X10 Fullsize and X10Comp are NOT interchangeable. 

 SMITH AND WESSON 

        M&P series fit the same except for length of slide/barrel. 9mm, 40SW and 10mm are compatible..........45acp is not. 

        Shield models fit the same except for length of slide/barrel.

        EZ9 and EZ380 are not the same size.

        

SPRINGFIELD ARMORY

       Prodigy fit the same except for length of slide/barrel. May fit some of the other wider framed 2011 pistols. 

       Hellcat and Hellcat Pro are not compatible. 

       Most of the XD series fit the same except for length of slide/barrel.

       XDM Elite 9MM fit the same except for length of slide/barrel.

       XDM Elite 10mm fit the same except for length of slide/barrel.

       XDs series fit the same except for length of slide/barrel.

     

TAURUS

       G3 and G2 series fit the same except for length of slide/barrel. 

       GX4 and GX4XL fit the same except for length of slide/barrel.

       TH9 and TH9C fit the same except for length of slide/barrel.

 

WALTHER

      PDP Series fit the same except for length of slide/barrel. The PRO SD versions have threaded barrels. The 4.6" version is the same as the regular 4" version but with a threaded barrel. The 5.1" version is the same as the regular 4.5 version but with a threaded barrel. The steel frame version does not fit the same.

     PPQ Series fit the same except for length of slide/barrel.

     PPQ SF Series fit the same except for length of slide/barrel.

 

WILSON COMBAT

       The X9 Series and Experior Series fit the same except for length of slide/barrel.

 

ZEV

     OZ Series fit the same except for length of slide/barrel.